Duracell Powerpack 300 Specifications download pdf (Page 32)

Recharging the Duracell

Powerpack

600 Battery

To check the battery’s charge level, press the Fuel Gauge button.

Note: Battery Fuel Gauge status is only accurate when

the Duracell

Powerpack has been disconnected from all

appliances and all charging sources for 15 minutes.

You can recharge the battery using:

• The fully automatic “plug-in-and-forget” AC charger.

• The DC charging cable to recharge from your vehicle

• A generator equipped with a regulated 12 V battery

charging outlet.

• A solar panel.

Recharging with the AC Charger

Recharging with the AC charger is a true “plug-in-and-

forget” charging method.

CAUTION

Do not operate AC or DC appliances while the Duracell

Powerpack is being recharged with the AC charger. The AC

charger may be permanently damaged if AC appliances or

12 V DC appliances are operated while the AC charger is

connected.

To recharge with the AC charger:

1. Disconnect any 12 V DC appliance and turn the light

switch to OFF.

2. Turn the AC outlet ON/OFF switch to OFF.

3. Plug the AC charger into a standard AC wall outlet.

4. Insert the AC charger cable end into the charger

input socket located on the left side of the Duracell

Powerpack.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 46 47

No comments

Duracell Powerpack 300 Specifications Page 32